Production Description：
JHSW8803 Polyaspartic Transparent Polyurea is a two components, Polyaspartic polyurea, it has high weather resistance decorative topcoat independently developed by Qingdao Polyswell Technology Co.,Ltd. JHSW8803 can withstand the long-term exposure to ultraviolet radiation and no yellow, no aging. It is the set of anticorrosive, waterproof, weather-resistant, decorative functions.
Advantages：
1. Transparent, UV resistance and Excellent color stability
2. Excellent Physiochemical Properties
3. Ultra High-Strength and High-Elongation
4. Impermeable, Abrasion resistant
5. Seamless, flexible, slick and non-porous
6. No chalking and fading in long-term use outdoors
Recommended Uses:
a) High-grade building coating;
b) Ceramic tile of kitchen or toilet, wooden furniture or buildings;
Installation:
1. The surface of the substrate shall be clean and dry, free from dust, oil and rust;
2. It can be brushed or scratched. Please consult our technicist for details;
3. If applied on different substrates, better to apply primer to get good adhesion.
3. The recommended film thickness is between 100 and 500 microns, the single film thickness should be less than 250 microns, if you need to thicken, brush another layer in 3 hours after tack free of the first layer;
Packaging:
20 kilogram or 200 kilogram per drum. (Custom package available at additional charge)
Matters needing attention：
1. The constructor shall carry out necessary safety protection, wearing protective goggles, gloves, masks and other labor protection products.
Notes:
1. Wipe the residual liquid and reseal both the A side and B side well after use, once open, they should be used as soon as possible.
2. This specification is an accumulation of long term testing and experience. Published technical data and instructions are subject to change without notice.
For more information please contact us or visit our website.